ENGINE TYPE
4-stroke, Liquid-cooled, 4-cylinder, DOHC, 4-valves
DISPLACEMENT
998 cc
BORE X STROKE
79.0 × 50.9 mm
COMPRESSION RATION
13,0 : 1
RATED OUTPUT
147,1 kW (200.0 PS) @ 13.500 rpm
MAX. TORQUE
113.3 Nm (11.6 kg-m) @ 11,500 rpm
LUBRICATION
Wet sump
FUEL SUPPL
Electronic Fuel Injection
CERTIFICATION
Euro 5
CLUTCH
Wet, Multiple Disc
GEARBOX
6 Speed
FINAL DRIVE
Chain
IGNITION
TCI
STARTING
Electric
FRAME
Aluminium Deltabox, Diamond
FRONT SUSPENSION
Upside-down forks
FRONT SUSPENSION STROKE
120 mm
FRONT BRAKE
Hydraulic dual discs, Ø320 mm
REAR SUSPENSION
link suspension, Swingarm
REAR SUSPENSION STROKE
120 mm
REAR BRAKE
Hydraulic single disc, Ø220 mm
FRONT TYRE
120/70 ZR17M/C (58W) Tubeless
REAR TYRE
200/55 ZR17M/C (78W) Tubeless
LENGTH
2.055 mm
WIDTH
690 mm
HEIGHT
1.165 mm
GROUND CLEARANCE
130 mm
UNLADEN WEIGHT
202 kg
USABABLE TANK VOLUME
17,0 L
WHEELBASE
1.405 mm
SEAT HEIGHT
860 mm
M1-inspired carbon bodywork
The R1M comes with a radical factory-bike look inspired by the race-winning Yamaha M1 MotoGP bike. The aggressive front cowl and screen give a low frontal area for minimal drag, and the integrated fairing flows seamlessly into the fuel tank sides to give a tight tuck-in position for the most efficient aerodynamics.
Öhlins Electronic Racing Suspension (ERS)
The Öhlins Electronic Racing Suspension (ERS) is the most sophisticated suspension system available on a production Yamaha. Its advanced software enables you to corner, brake and accelerate more efficiently, and its user-friendly interface allows you to make rapid suspension setting changes to suit different tracks and surface conditions.
Öhlins NPX anti-cavitation gas forks
For enhanced surface feedback with more consistent damping performance, the R1M is equipped with high-tech Öhlins NPX gas forks. A small gas chamber in the fork axle brackets exert 0.6 Mpa of internal pressure to reduce cavitation on the rebound stroke. This enables the damping system to work more effectively, giving you accurate feel with increased control.
Lightweight carbon tail
To achieve the best mass centralisation together with a low race-ready weight the R1M features a carbon bodywork and front fender, as well as magnesium wheels and rear frame and a titanium lower fairing cover – and the carbon tail section underlines this sophisticated track bike's extremely high specification.
Engraved production number
Pride of ownership comes as standard with every R1M – after all, it's the most exclusive production Yamaha ever built. To highlight this bike's special status, the R1M is fitted with a specially engraved plaque showing its unique production number.
Brake Control (BC) system
On the race track you need precision control in every situation if you're going to get your lap times down. Featuring two modes, the R1M's Brake Control (BC) system analyses data, such as lean angle and slipping acceleration and instantly modulates hydraulic brake pressure, to prevent wheel lock ups for a smoother and faster lap.
Engine Brake Management (EBM) system
Control is everything when you're on the racetrack, and the R1M's Engine Brake Management (EBM) system allows you to select the best engine braking force for different riding conditions. Using data from various sensors, the EBM adjusts throttle opening, ignition timing and fuel injection volume to give you a choice of three engine braking modes.
998cc crossplane engine
Developed using M1 MotoGP technology, the 998cc engine features Bosch injectors that deliver a wide spray angle for increased efficiency. Specially designed finger-follower rocker arms and cam lobes give outstanding high rpm performance – and this EU5 crossplane engine also features a high efficiency lubrication system for optimum performance.
Ride-by-wire APSG throttle
The Yamaha Chip Controlled Throttle (YCC-T) is activated by a high-tech twistgrip assembly that gives a natural feeling for precise control. Featuring a spring, slider and gear that give a smooth and progressive feel, the lightweight ride-by-wire APSG (Accelerator Position Sensor Grip) twistgrip gives instant throttle response.
Launch Control (LCS) system
By using data from a wide range of sensors, the R1M's Launch Control System (LCS) gives you a high level of control during racing starts. For the fastest and most aggressive launches, LCS1 mode is programmed to activate at 9,000 rpm with a throttle opening of 41 degrees.
Bridgestone Battlax RS11 tyres
Whether you're accelerating aggressively, braking hard or banking over at full lean angle, you need to have total confidence in your tyres. Featuring a race-developed pattern together with a special compound, the Bridgestone Battlax Racing Street RS11 tyres – with a 200 section rear – give you the highest levels of traction combined with outstanding feel.
Exclusive CCU enables wireless tuning
The R1M's exclusive Communication Control Unit (CCU) has a data logging function that allows you to record a wide range of running data, including lap times, speed, throttle position, GPS tracking, lean angle and more. It can also be used to communicate with the Yamaha Ride Control (YRC) system when viewing, downloading or changing the running modes.
6-axis Inertial Measurement Unit (IMU)
Equipped with an accelerometer as well as a gyro and G-force sensor that measure pitch, roll and yaw, the sophisticated 6-axis Inertial Measurement Unit (IMU) delivers precise running information to the ECU – 125 times per second. This data enables the ECU to operate the electronic rider aids and maintain the highest levels of machine control for reduced lap times.
High-tech electronic control features
Every time that you ride your R1M, you can be confident that its advanced electronic control technologies are working with you all the way to achieve the highest level of engine and chassis controllability. With ERS, QSS, Lift Control, Launch Control, Slide Control, Brake Control and Engine Brake Management, you're able to choose the right set up for any given situation.
Explore this vehicle in more detail with our handy video guide. We’ll talk you through its main features, show you some of the highlights of the bike and explain why it could be the right fit for you.
The information in this video was correct at the time of filming. We have made every effort to ensure this video is an accurate representation of the bike above. However, please contact the branch for full details.
Share This Video